![]() If your serial number displays correctly, then proceed to and continue registration.Try inserting the USB Transceiver into a different USB port. NOTE: If it reads 83-88-60-80 on-screen, then the PC is not reading your USB Transceiver. Under the option Settings & Modes you will see Serial No:, which must match the serial number sticker on your gateway.Next press the Factory Reset Button in the software. Plug the USB-stick into an open port then select Show USB ERF GATEWAY. Right click (or double-click to re-open) the software.The USB Transceiver requires a working USB port either directly on the PC or in a USB-powered hub (which has it�s own a/c adapter).Make sure you have the USB-ERF-Gateway software running in your system tray ( blue Icon with a yellow Sun - lower right corner). ![]() Your USB gateway uses the software to receive forecasts. USB Gateway Registrationĭownload and install the USB/ERF Gateway Software if you have not already done so. turn off PC, lose internet, power outage or low batteries). See our Lost Forecast instructions when the display has blank boxes, or you experience a service interruption (e.g. PC suggestions are in our Power Management Guide. Registration is as simple as following the instructions on-screen or see our Registration Guidelines (Appendix D).Ī USB Gateway must stay connected (PC on), or be manually synchronized. We do not provide versions for the Mac or Linux.Windows XP/SP3, Vista/SP2, or Windows 7 (32/64-bit)/SP1.We do not support TX60s on the USB gateway. Displays on the USB Gateway are limited to full day forecasts (no microforecast and no warnings). Our USB Transceiver supports a forecast display without a router. USB Gateway Registration System Requirements - a Windows Only Option ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2023
Categories |